Technical Help
& Education
Glossary Of Terms
Speakers Main Page
How Speakers Work
Choosing Speakers
What's A Woofer?
What's A Midrange?
What's A Tweeter?
Other Speaker Types
More Speaker Types
What's A Capacitor?
Installing A Capacitor
What's A Crossover?
What's An Equalizer?
Speaker Enclosures
Theile/Small Param.
About Power Amps
Installing An Amp
Installation Tips
Power Ratings
Installing/Replacing
Head Units/Receivers
Installing Neon/LED
Eliminating Noise
Use The Right Tools
Manufacturer's Links
Home Stereo
Tech Information
FAQ
Glossary
Home Speakers

Personal Stereo
& Electronics
Laptop Computers
Cell Phones & PDAs
Portable TV & Video
Electronic Readers
MP3/Music Players
CD Players/Booms
Earphones/Buds
Digital Cameras
Video Cameras
Personal GPS
Bluetooth
Calculators
Accessories

Marine Stereo &
Electronics
Stereo Amplifiers
Stereo Speakers
Stereo Woofers
Woofer Tubes
Enclosed Speakers
Wakeboard Speakers
CD/Mp3 Receivers
TVS & Video
VHF Radios
GPS Navigation
Fish Finders
Depth Finders
Chart Plotters
Accessories

Home Stereo
& Electronics
Flat Screen & HD TVs
Surround Sound
Home Theater
DVD Players/Tivo
DVD Recorders
Blu-Ray Devices
Amplifiers/Tuners
Speaker Systems
Subwoofer Drivers
Midrange Drivers
Tweeter Drivers
Powered Subwoofers
Outdoor Speakers
Stereo Accessories
Digital Photo Frames
Video Game Systems
Game Accessories
Video Games
Home Security/Alarms

Computers &
Related Products
Desktops & Laptops
Add-Ons/Peripherals
Computer Monitors
Computer Software
Computer Games
Printers & Scanners
Ink/Specialty Papers
Parts & Components
Computer Supplies
Security/Tech Support

Car Stereo &
Electronics
Amplifiers
Subwoofers
Full-Range Speakers
Midrange Speakers
Tweeters
Power Capacitors
Empty Enclosures
Loaded Enclosures
CD/Mp3 Receivers
CD Changers
Bass Packages
Car TV & Video
Satellite Radio
Bluetooth Wireless
GPS Navigation
Neon/LED Lighting
Radar Detectors
Chrome Mufflers
Car Alarms/Security
AUTO PARTS STORE
Auto Wiring &
Accessories
Air Horns
Power Antennas
Antenna Boosters
A/V Controllers
Bass Blockers
Crossovers
Dynamat
Equalizers
Fans (Cooling)
FM Modulators
Interfaces
Line Converters
Noise Filters
Power Inverters
Power Supplies
RCA Cables
RCA Splitters
Remote Controls
Signal Boosters
Vibration Control
Speaker Grills
Wiring Kits

Sponsored
Advertisers

America's
Electronics
Superstore

Huge Selection
Of Speakers &
Drivers From
Speaker Store

Help For Writers From WM
Publishing

Barbara, A Novel
Of First-Time
Intimate Sexual
Adventure

Cute The Novel
(Coming Soon)

Season's
Readings, A
Book Of Essays

MetroDirect
Communications

Huge Selection
Of Car Power
Amps From
The Amp Depot

Huge Selection
Of Car Audio
Capacitors From
Powercaps

Logos, Banners
& Web Design
By R. LeBeaux

- Bleep Them -
Humor, Satire
& Nasty Stuff

Fine Art & Wood
Sculpture

Free Audio &
Stereo Tech
Information

 

Home Stereo Frequently Asked Questions

Q. What size wire do I need to use?
A. We suggest using 16 to 18 gauge wire (AWG) for all Boston Acoustics speakers. For runs longer than 75 feet, a lower gauge (thicker wire) may be needed to avoid any loss of signal.

back to the top

Q. What is the difference between Dolby Pro Logic and Dolby Digital?
A. Dolby Pro Logic is a 4-channel surround system that provides left and right main speaker channels, a center channel to keep dialogue centered on the TV regardless of viewer location, and a mono surround channel (This mono signal is usually spilt between two surround speakers). Dolby Digital is a 5.1 channel surround system that provides left and right main speaker channels, a center channel, and discrete, full-range left and right surround channels. The .1 in 5.1 is the Low Frequency Effects (LFE) channel. It sends additional bass information to the subwoofer-usually involving dramatic sound effects like explosions.

back to the top

Q. What is a diffuse field surround?
A. Diffuse field (Sometimes called "dipole surrounds duplicate the effect produced by multiple surround speakers found in movie theaters. They fire sound forward and back, but not directly at your ears. Sound bounces off all of the room's surfaces before reaching your ears, creating a diffuse sound field that feels like its all around you. The result: your ears will not be able localize where the sound is coming from, and will be fooled into believing they are in a new environment entirely. Conventional speakers often fire sound right at your ears, and the effect is lost.

back to the top

Q. What is "timbre matching"?
A. This means that all of the speakers in a home theater system have the same sound characteristics or voicing. This allows for a smooth, convincing transition between left, center, right, and surround channels.

back to the top

Q. Where should I place my subwoofer?
A. Subwoofers sound best if placed near a wall or corner of the room. The subwoofer will use the surface area on the wall or walls to reinforce the bass and increase its overall output. This is referred to as "loading". Bass frequencies are omni-directional (A fancy way for saying they radiate in all directions, not in a single direction like high frequencies) so it is not necessary to place the sub in the front of the room.

back to the top

Q. When should I use the phase switch on my subwoofer?
A. The phase switch is used when the bass is weak at your listening area. Some rooms have what is known as a " bass null" or spot where there is little or no bass. If this null happens to be right at your listening area then the switch can be used to help reverse this effect.

back to the top

Q. What is the proper setting for the crossover on my powered subwoofer?
A. If you are using Digital 5.1 home theater electronics, the best results will be obtained if you bypass the subwoofer’s built-in crossover altogether. Receivers with 5.1 channel processing perform their own bass management functions—that is, they do the “crossing over” themselves. In this case, set the receiver’s set-up menu to “subwoofer—yes” and connect your subwoofer through its “bypass crossover” inputs.

If you are not using Digital 5.1 electronics (you have an older Dolby Pro Logic receiver or a regular two-channel system, for example), or have an older subwoofer that does not have “bypass crossover” inputs, then the best way to adjust the variable crossover is to experiment with different settings. A good place to start is slightly above he -3dB point of your main left and right speakers. If they're rated down to 70 Hz, for example, start around 80 Hz. Use the subwoofer's volume control to smoothly blend its output with the rest of your system and to adjust for personal taste.

back to the top

Q. Can I place my subwoofer inside a cavity in my entertainment center?
A. Yes, you can place the subwoofer in the bottom of an entertainment center provided you keep at least 3” clearance all around the subwoofer cabinet for adequate ventilation and cooling and to allow the driver and woofer ports to “breathe” properly for best response. With solid doors, do not obstruct the front of the subwoofer. Keep in mind that the subwoofer will excite certain resonances in the room (It'll make objects rattle and buzz), which may be undesirable. If you can't obtain satisfactory results in the entertainment center, place the subwoofer outside the wall unit, near the wall and corner.

back to the top

Q. What mode do I set the center channel to?
A. The center mode on the surround processor or receiver should be set to normal. You should only use the "Wide" mode if your center channel is a large, full-range speaker. In the "Normal" mode, the center channel's bass frequencies are directed to the main left and right channels and thus to your subwoofer, maximizing your system's bass output.

back to the top

Q. How close should the main speakers be apart from one another?
A. Ideally speakers should placed approximately 6-12 feet apart. If you place speakers more than 12 feet apart, place them at an angle pointing in toward the room's listening area, so you will not lose the stereo effect. If placement is too close, the sound will not have a three-dimensional feeling.

back to the top

Q. Do the surrounds have to be the same distance apart as the fronts?
A. No. The surround sound speakers can be farther apart than the main speakers. This is common and will not affect the spatial or ambient qualities of the rear channel information.

back to the top

Q. How far can the center channel be above the main speakers?
A. The center channel should be situated on top of the TV. If the height differential between the main speakers and the center channel is more than 18", angle the center channel so it is firing downward at the listening position.

back to the top

Q. Should I use diffuse-field or direct-radiator surround speakers?
A. Choosing a diffuse-field surround or conventional direct-radiator speaker is a personal choice. The diffuse-field surrounds will envelop the listener in non-localizable ambient information providing a greater sense of space, whereas the forward firing speaker will offer better discrete left and right channel information.

back to the top